Search

A     B     C     D     E     F     G     H     I     J     K     L     M     N     O     P     Q     R     S     T     U     V     W     X     Y     Z




Formulas
All Tests
Kfz-Jobs
Motoroil-Finder



 Cloze Test 2



1. For the CAN bus, the urgency of the is determining, not the meaning of the participant.

2. Basically only (two words) communicate via the CAN bus (picture above).

3. CAN bus technology would guarantee the functionality of a lighting system before every of journey.

4. Each message of a CAN bus must contain at least one .

5. Eight microseconds correspond to seconds.

6. The different voltages of the data line are achieved by connecting of various resistors.


7. The highest number that can be transmitted in the system shown above is .

8. Before the actual message is sent, a few alternating for synchronization are send.

9. Voltages between and are not considered to be distinct.


10. In the picture above controller 1 has prevailed because win against .

11. Each participant on the CAN bus also reads its own .

12. If a message is not being delivered at the moment because of another, more important one, the participant tries again after seconds.


13. The number 3 identifies the (two words).


14. This layout is called an bus (2 words with a hyphen).

15. In such a system higher is possible.


16. The cable with the lower voltage is identified with the short term: and those with the higher voltage: .

17. Mainly the between both voltages is interpreted.

18. The bits per second transmitted are called .

19. 4800/min correspond to /s.


20. A connects buses with each other.









Sidemap - Technik Imprint E-Mail Datenschutz Sidemap - Hersteller